FUJITSU x178 - Manual (Page 9)

NOTE!
The power button does not disconnect the display unit from
the mains. The only way to isolate the display unit com-
pletely from the mains supply is to unplug the mains cable.
There is no need to turn your display unit on and off
If the power management function of your computer is enabled,
your display unit turns on and off automatically. You control power
management from your computer. See your computers’EasyGuide
for more information.
Reducing power consumption
Once you have set the timeout periods through the power
management function in your computer, the computer will enter
power savings modes automatically after periods of inactivity.
NOTE!
The sereensaver function (where the screen image is
replaced by a pattern) does not affect power consumption.
The purpose of the sereensaver is to extend the usable life
of the display.
English
8
Display power management
MODE
Operating
Standby
Suspend
Power-off
Unplugged
LED
green
amber
amber/green blinking
amber blinking
not illuminated
POWER
CONSUMPTION
≤
120 W
≤
70 W
≤
15 W
≤
3 W
0 W
Fujitsu 8/16/92 5:16 PM Page 11