FUJITSU PG-FCS102 - Manual (Page 53)

4 Broadcom Gigabit Ethernet Teaming Services
153
E
4.9.3 Intermediate Driver (Virtual Adapter/Team)
The intermediate driver is identified by BLFM regardless of the base driver revision. "• Intermediate
Driver Event Log Messages" (
J pg.153) lists the event log messages supported by the intermediate
driver, explains the cause for the message, and provides the recommended action.
• Intermediate Driver Event Log Messages
17 Unknown PHY detected.
Using a default PHY
initialization routine. The driver could not read
the PHY ID. Replace the adapter.
18 This driver does not
support this device.
Upgrade to the latest
driver. The driver does not
recognize the installed
adapter. Upgrade to a driver
version that supports this
adapter.
19 Driver initialization failed. Unspecified failure during
driver initialization.
Reinstall the driver, update
to a newer driver, run
BACS2 diagnostics, or
replace the adapter.
Message
Number
Message Cause Corrective Action
1 Unable to register with
NDIS. The driver cannot
register with the NDIS
interface. Unload any NDIS
drivers.
2 Unable to instantiate the
management interface. The driver cannot create
a device instance. Reboot the operating
system.
3 Unable to create
symbolic link for the
management interface. Another driver has
created a conflicting
device name. Unload the conflicting
device driver that uses
the name "Blf".
4 Broadcom Advanced
Server Program Driver
has started. The driver has started. Informational message
only.
No action is required.
5 Broadcom Advanced
Server Program Driver
has stopped. The driver has stopped. Informational message
only.
No action is required.
6 Could not allocate
memory for internal data
structures. The driver cannot
allocate memory from
the operating system. Close running
applications to free
memory.
Message
Number
Message Cause Corrective Action