FUJITSU PG-FCS102 - Manual (Page 78)

178
4 Select the type of team you want to create and then click [Next].
If the team type is an SLB type team, click [Next]. If the team type is not an SLB type team,
then a dialog box appears.
Verify that the network switch connected to the team members is configured correctly for the
team type, click [OK], and continue.
5 From the "Available Adapters" list, click the adapter you want to
add to the team and then click [Add].
Remove team members from the "Team Members" list by clicking the adapter and then
clicking [Remove]. Click [Next].
` There must be at least one network adapter assigned to the team.