Fluke 233 User Manual

Page 6

Advertising
background image

233
Getting Started Manual

4

•

Use only specified 1.5-V AA batteries
(three in the Meter base and two in the
display), correctly installed, for Meter
power.

•

Comply with local and national safety
requirements when in hazardous
locations.

•

Only use test leads that have the same
voltage, category, and amperage ratings
as the Meter and that are approved by a
safety Agency.

•

Measure a known voltage first to make
sure that the Meter operates correctly. If
you are unsure, have the Meter
examined.

•

Use protective equipment, as directed by
local or national authorities when in
hazardous work areas.

•

Measure the test leads for continuity
before use. Do not use if the resistance
is high or noisy.

•

Use only specified replacement parts in
the Meter.

•

Keep fingers behind the finger
guards on the probes.

W

Caution

To prevent damage to the Meter or to the
equipment under test, follow these
guidelines:

•

Disconnect circuit power and discharge
all high-voltage capacitors before you do
diode tests or measure resistance,
continuity, or capacitance.

•

Use the correct terminals, function, and
range for all measurements.

•

Before a current measurement, do the
fuse test.

Advertising