Safety information – Fluke 1750 User Manual

Page 11

Advertising
background image

Power Recorder

Safety Information

3

Safety Information

See the Specifications section for a full agency compliance list. Table 1 lists symbols that

appear on the Recorder and in this manual.

XW

Warning

To prevent possible electrical shock, fire, or personal injury:

•

Carefully read all instructions.

•

Do not work alone.

•

Do not use the Product around explosive gas, vapor, or in

damp or wet environments.

•

Use only insulated current probes, test leads, and adapters

as supplied with the Product.

•

Examine the case before you use the Product. Look for

cracks or missing plastic. Carefully look at the insulation

around the terminals.

•

Remove all probes, test leads, and accessories that are not

necessary for the measurement.

•

Make sure the ground conductor in the mains power cord

is connected to a protective earth ground. Disruption of the

protective earth could put voltage on the chassis that could

cause death.

•

Only use probes, test leads, and accessories that have the

same measurement category, voltage, and amperage

ratings as the product.

•

Do not use exposed metal BNC or banana plug connectors.

•

Do not put metal objects into connectors.

•

Do not operate the Product with covers removed or the

case open. Hazardous voltage exposure is possible.

•

There are no user-replaceable parts in the Product. Have

an approved technician repair the Product.

•

Use the Product only as specified, or the protection

supplied by the Product can be compromised.

Advertising