Clock and timer – Fisher & Paykel OB60 User Manual
Page 17
15
Clock and timer
Fig. 11 Clock display and control buttons
Buttons:
Timer
Cooking time
End of cooking time
Decreases the number shown on the display or
changes the volume of the beeps
Increases the number shown on the display
Illuminated symbols:
A - flashing - oven in automatic position but not set
A - steady illumination - oven set for automatic cooking
Cooking taking place
Timer in operation
Setting the clock
When first connected, or after a power failure, ‘0
.
00’ will flash on the display.
To set the clock, press the
and
buttons together and then the
and
buttons.
Note: changing the time will delete any automatic program.
Using the timer
The timer can be set for up to 23 hours and 59 minutes.
To set the timer, press the
button, then the
and
buttons.
To check the remaining time press the
button.
When the time is up, the timer will beep. Put ‘Press the
button to turn it off.
Note: if ‘A’ is flashing on the display, press the
and
buttons together.
Setting the timer volume
You can select from three volume levels by pressing the
button.