Fisher-Price BARBIE KEEP BEACH RANGER 78478 - Manual (Page 14)

Headlight
Lens
Wide Notch
Wide Tab
Lens Guard
13
• Fit the wide notch in the side of a headlight lens under
the wide tab on a lens guard.
• Press firmly on the inside of the headlight lens to snap it
into the lens guard.
• Repeat this procedure to assemble the other headlight
lens to the remaining lens guard.
• Turn the vehicle body upright.
• Position the steering wheel so that the spokes form a
“Y” as shown.
• Fit the steering wheel onto the steering column.
• Fit a cap nut onto the end of the steering column.
• Tap the cap nut with a hammer to secure it on the
steering column.
Helpful Hint: You may want the help of another adult to
support the steering column while you tap the cap nut
with the hammer.
• Insert the end of the steering column through the hole in
the steering rod.
• Fit a cap nut onto the end of the steering column.
• While supporting the steering column, tap the cap nut
with a hammer to secure it on the steering column.
Helpful Hint: You may want the help of another adult to
support the steering column while you tap the cap nut with
the hammer.
14
11
Steering Wheel
Cap Nut
Steering
Column
“UP”
Assembly
10
Steering Rod
Cap Nut
End of Steering Column
Bottom View
12
Steering Wheel
Steering
Wheel
Cap
• Fit the steering wheel cap into the center of the steering
wheel with the screw holes aligned.
• Insert two #8 x 1" screws as shown.
• Tighten the screws with a Phillips screwdriver.
Do not over-tighten.