Fisher-Price BARBIE KEEP BEACH RANGER 78478 - Manual (Page 19)

29
• With the seat at an angle, insert the tabs on the front
edge of the seat into the slots in the foot-well wall .
• Push down firmly on the edge of the seat above each
tab to snap the tabs into the slots .
• Rotate the back of the seat down to snap the seat back
tabs into the slots in the vehicle body. Push down firmly
on the seat back
. 11 3
11 2
11 1
Seat
Tabs
Seat Back Tabs
Slot
1
2 11 3 PUSH
HERE
30
31
#8 x 1" Screw
• Insert a #8 x 1" screw into the rear of seat as shown.
• Tighten the screw with a Phillips screwdriver. Do not
over-tighten.
Sport Bar
Canopy
Canopy Sleeves
Canopy
Sleeves
• Position the sport bar on its side so that the sport bar
ends curve away from you.
• Position the canopy opposite the sport bar with the
netting facing away from you.
• Slide the four canopy sleeves onto the sport bar.
Assembly
19
• Insert each end of the long seat belt strap through a slot
in the center of the seat. Make sure the fasteners face
the outer edge of the seat.
• Pull each side of the long seat belt strap evenly through
the slots. Make sure to pull each T-loop through a slot.
• Turn the seat upright.
T-Loop
Fastener
Long Seat Belt Strap
28