Ferris Industries ZMT 160 - Manual (Page 4)

ZMT Owner’s Manual
2 TECHNICAL FEATURES
2.1 FERRI shredders have been designed to shred materials growing or laying on the
ground, e.g. grass, bushes, sticks and shrubs up to .8”. diameter (proper use).
Any other use is considered improper and the manufacturer disclaims all
responsibility for any consequential injuries to people or for damage to the machine.
“Proper use” also refers to the safety and maintenance rules provided by the
manufacturer.
Technical Names (Figure 2)
1 - PTO Shaft 10 - Ram To Adjust Flail Head
2 - Levers To Adjust Flail Head 11 - Stand
3 - Gearbox 12 - Arms For Side Movement
4 - Pulleys 13 - Joint Pin
5 - Belts 14 - 3-Point Linkage
6 - Frame 15 - Ram For Side Movement
7 - Rotor 16 - Front Guard
8 - Flails 17 - Side Guard
9 - Roller
This machine is in conformity with the following provisions of law:
• Directive Machine 89/392/CEE and following additions: 91/368/CEE, 93/44/CEE
and 93/68/CEE;
• Regulations UNI EN 292/1 and 292/2 (machinery safety);
• DPR 27th April’1955, N. 547 (Rules for the prevention of industrial accidents).
Figure 2
3