Ferris Industries ZMT 160 - Manual (Page 5)

ZMT Owner’s Manual
2.2 Technical Specifications (Table 1)
Table 1
Model ZMT 160 ZMT 180 ZM T200
Width of cut ft. 63” 71” 79”
Min. Tractor required power HP 50 - 60 60 - 70 70 - 80
Min. Tractor Weight 4818 5256 5694
PTO speed rpm 540 540 540
Max. Absorbed Power* HP 32 52 52
Weight Machine / Weight PTO Shaft lbs. 984 / 53 1178 / 53 1237 / 53
3-point linkage cat. II - III II - III II - III
Rotor Speed rpm 2430 2510 2510
Multi-Use Flails num. 40 48 48
Hammer Flails num. 20 24 24
Max. Pressure psi 2750 2750 2750
Dimensions
A - Width in. 63” 71” 79”
B - Length in. 35” 37” 37”
C - Height in. 17” 19” 19”
D - Total Height in. 26” 28” 28”
E - Total Width in. 70” 77” 85”
* When the absorbed power exceeds the maximum power indicated in Table 1 it is
recommended to use a PTO clutch (torque limiter).
2.3 Noise
The sound level of this machine, as measured at the operator’s position, ranges from
75 dB to 77.2 dB when the cab is closed, and from 81.9 to 83.4 dB when the rear
window is open. The acoustic power level is LWA 102.5.
When the sound level perceivable at the operator’s position ranges from 85 dB and
90 dB, the use of ear protectors is recommended.
4