Final Sound Final 300i - Manual (Page 11)

FINAL SOUND 300i Loudspeaker Manual vs. 1.3 -US- c FS 2007RJ 11
.
4. Final Sound center loudspeaker
For building a home theatre based on 300i using floor standing models, 300i wall mountable models or
a combination, Final recommends a 150i or 400i center panel. Center panels can be wall mountable or
fit to a table top stand.
How to unpack a Final Sound center panel?
A Final Sound center panel comes in one packaging unit.
A Final Sound center panel package contains:
- 1 center panel
- 1 power supply 12VDC
- assembly materials including screws to fix the flat-panels to the wall
- 1 manual
- a table top stand (included in the 400i package and optional for the 90i and 150i)
Each individual component is packed in its own carton. The easiest way to unpack is to open the
upper side of the box(check the labels), take out the separate units and carefully remove the cartons
and plastic bags. Take care to avoid putting pressure on the black loudspeaker’s stator plates.
If your packaging is not complete, do not operate the system but contact your dealer.
We recommend you to save all packaging materials for possible later use.
If any unit appears to be damaged when unpacking, do not operate the damaged unit. Repack the unit
in its original carton and notify your authorized Final Sound dealer immediately.
Assembling center panels
Assembling a center panel is straightforward. The kit should contain:
wall bracket kit (the wall bracket is also used to fix the center panel to the table top stand)
1 Allen key