Final Sound Final 300i - Manual (Page 16)

FINAL SOUND 300i Loudspeaker Manual vs. 1.3 -US- c FS 2007RJ 16
.
CONNECTING FOR HOME THEATRE
(Figure 2) If you have an AV-receiver for five, six or seven channel Dolby Digital/DTS
surround sound, you can use the ‘standard’ LFE connection method for subwoofers.
• Connect the AV-receiver’s LFE output to the subwoofer’s left OR right LINE IN RCA
terminal.
•
Connect the five (six or seven) electrostatic panels to the five (six or seven) AV-
receiver’s loudspeaker output terminals.
•
Adjust the ‘loudspeaker size’ in the receiver’s menu to SMALL. This will activate the
receiver’s LFE output.
• If possible, adjust the crossover frequency between the panels and the subwoofer in
the menu. Choose the panel’s lowest frequency to start.
•
You cannot use the subwoofer’s special high pass filter facilities for driving the
electrostatic panels.