Final Sound Final 300i - Manual (Page 4)

FINAL SOUND 300i Loudspeaker Manual vs. 1.3 -US- c FS 2007RJ 4
.
2. Final Sound Model F300i floor standing loudspeakers
How to unpack the Final Sound F300i stereo system
The Final Sound Model F300i stereo system consists of two separate packaging units. The Model
F300i flat-panel loudspeakers and the optional Final Sound subwoofer are packed separately.
(the 300i panels for the rear channels in home theatre applications are basically the same panels as
the front loudspeakers. All unpackaging and assembling instructions for the rear panels are identical to
those for the stereo front panels)
The Model F300i Stereo flat-panel loudspeaker packaging contains:
- 2 Model F300i flat-panel loudspeakers (left and right)
- 2 power supplies 12VDC
- 2 footplate assemblies
- assembly materials including screws to fix the flat-panels on the footplates
- 1 manual
Each individual component is packed in its own carton. The easiest way to unpack is to open the
upper side of the box (check the labels), take out the separate units and carefully remove the cartons
and plastic bags. Take care to avoid putting pressure on the black loudspeaker’s stator plates.
If your packaging is not complete, do not operate the system but contact your dealer.
We recommend you to save all packaging materials for possible later use.
If any unit appears to be damaged when unpacking, do not operate the damaged unit. Repack the unit
in its original carton and notify your authorized Final Sound dealer immediately.
Assembling Model 300i
Assembling the Model300i floor standing panels is straightforward. The kit should contain:
Two foot plates
Two aluminum spacers
8 spikes
6 hexagon screws
1 Allen key