FUJITSU F9600 F9600c - Manual (Page 46)

38
CODE CALL
The Code Call feature lets you notify a party of a call using a bell or
chime. The signal repeats as long as you remain on the line or until
the paged person answers. This feature also lets the paged person
answer the code call from any extension.
To place a Code Call:
Action Results
1. Lift handset. You hear dial tone.
2. Dial the code call
registration code _____
and the zone number.
3. Dial the code for the party
you are paging.
4. Remain on the line. You hear the code call
equipment (typically a
chime or a bell).
NOTE
To answer a Code Call (when you hear the code call tone):
Action Results
1. Lift handset at any extension You hear dial tone.
after you hear the chime or
bell.
2. Dial the code call answer You are connected with the
code _____ and the zone paging party.
number.
You must remain on the line to let the called party answer. When the
code call is answered, you are connected with the party.