Fluke NETWORK SERVICE MODULE DTX-NSM - Manual (Page 5)

DTX-NSM Instruction Sheet/English
Page 5
Identifying Links (twisted pair only)
The ID Locator function helps you quickly identify link connections at a patch
panel. This function requires one or more optional Fluke Networks LinkRunner

Cable ID locators.
To identify a link:
1 Connect one or more cable ID locators to one end of the link(s).
2 Turn the rotary switch to MONITOR, select ID Locator; then press P .
3 Connect the tester to different jacks, pressing P to rescan each time, until
Found Cable ID and the identifier's number appears.
Registration
Registering your product with Fluke Networks gives you access to valuable
information on product updates, troubleshooting tips, and other support
services.
To register, fill out the online registration form on the Fluke Networks website
at
www.flukenetworks.com/registration .
Contacting Fluke Networks
www.flukenetworks.com
[email protected]
+1-425-446-4519 or 1-800-283-5853
• Australia: 61 (2) 8850-3333 or 61 (3) 9329 0244
• Beijing: 86 (10) 6512-3435
• Brazil: 11 3044 1277
• Canada: 1-800-363-5853
• Europe: +44-(0)1923-281-300
• Hong Kong: 852 2721-3228
• Japan: 03-3434-0510
• Korea: 82 2 539-6311
• Singapore: 65-6799-5566
• Taiwan: (886) 2-227-83199
Visit our website for a complete list of phone numbers.