Franklin RK-8203 - Manual (Page 13)

Setting a Passcode
1. Turn the dial down until you see SET A PASS-
CODE?.
2. Press Y.
You are prompted to enter a four-digit passcode.
3. Enter a four-digit passcode.
4. Press SAVE to save your passcode.
You are prompted to confirm your passcode.
5. Press Y to confirm and activate your pass-
code.
Press N to exit without confirming your pass-
code. The passcode is not set.
Changing/Deleting a Passcode
1. Turn the dial down until you see SET A PASS-
CODE?.
2. Press Y.
3. Enter your existing passcode.
4. Press EDIT to change or SHFT and EDIT (
DEL
)
to delete.
Follow the prompts on the screen.
Press N to exit without making any changes.
The old passcode is still active.