Franklin RK-8203 - Manual (Page 29)

Synchronizing Records
Before you can synchronize records you must:
1. Install the Rolodex ® Electronics Desktop
Manager onto your PC.
2. Connect the Rolodex ® device to the PC using
the serial cable provided.
• Turn your PC off.
• Connect the 9-pin plug of the cable into a
free communications (COM) port.
• Connect the single-pin plug of the cable into
the PC PORT hole on your Rolodex device.
3. Start the Desktop Manager.
4 From the PC, click Start | Programs |
Franklin Electronic Publishers | Rolodex
Electronics Desktop Manager.
5. Set the communication port.
6. From the Desktop Manager, click Setup |
Connection. Select the port you want and
click OK.
7. Use Intellisync for Rolodex Electronics to
match your PC organizer programs with the
organizer programs on your Rolodex
® device.