Problems & solutions, Problem solution – Fisher-Price J2457 User Manual

Page 13

Advertising
background image

13

Problem

Solution

You hear static or buzzing

There may be a physical obstruction or noise level causing

interference. Change the location of reciever or try a

different channel. Range varies depending on surrounding

conditions such as noise levels, physical obstructions

and signal interference.

Reception display on receiver(s) LCD screen

flashes and you hear a low pitched beep

Transmitter power is off. Turn transmitter power on.

Transmitter and receiver(s) are on different channels.

Change all units to the same channel.
Loose power cord connection and transmitter power is off.

Check transmitter power cord plug-to-outlet connection.
No power to wall outlet and transmitter power is off.

Make sure light switch that controls power flow to wall

outlet is on.
Power is off because circuit breaker for room is off.

Make sure house fuses and circuit breakers are on.

Receiver(s) LCD screen does not turn on

Receiver power is off. Turn receiver power on.
Battery needs to be recharged. Charge the battery for 8

hours. Or, use the AC adaptor as a power source (and

charge the battery at the same time!).
Power is off because circuit breaker for room is off.

Make sure house fuses and circuit breakers are on.
No power to wall outlet and power is off. Make sure light

switch that controls power flow to wall outlet is on.

Receiver(s) LCD screen indicates low battery

power and you hear a high pitched beep

Battery needs to be recharged. Charge the battery for 8

hours. Or, use the AC adaptor as a power source (and

charge the battery at the same time!).

Transmitter power indicator does not light

Transmitter power is off. Turn transmitter power on.
Loose power cord connection and transmitter power is off.

Check transmitter power cord plug-to-outlet connection.
No power to wall outlet and transmitter power is off.

Make sure light switch that controls power flow to wall

outlet is on.
Power is off because circuit breaker for baby’s room is off.

Make sure house fuses and circuit breakers are on.

You can hear conversations or sounds

from other homes

There is signal interference due to other nursery monitors

on same channel or cordless telephone use. Change the

channel on all units.

Problems & Solutions

Hint: If, after checking all of these solutions, you believe that your transmitter power cord or AC adaptor(s)
are damaged, please contact Fisher-Price

®

.

Advertising