FUJITSU answers^2 D1740 - Manual (Page 42)

SmartCard reader - error messages
SmartCard reader - error messages
This chapter contains error messages generated by the SmartCard reader (chipcard reader).
Boot access denied
The Sicrypt SmartCard has no access rights to the system.
Check your chipcard
Either the Sicrypt SmartCard has been wrongly inserted, or it is not a PC-Lock Sicrypt card.
Chipcard reader FAIL
An error has occurred on the serial port to the SmartCard reader (chipcard reader). If this error
occurs always or often, the connection between the SmartCard reader and the mainboard must
be checked, or the SmartCard reader must be replaced. While the error is present, access to
the system is blocked.
Non authorized chipcard
The Sicrypt SmartCard cannot be used on this PC. The Sicrypt SmartCard has been
configured for a different PC.
PC-Lock installation FAIL:
An error has occurred during installation of PC Lock. Do not switch off, but insert the
"BIOS Flash diskette", and try the installation again.
The chipcard is blocked.
Enter the Admin PIN:
You have exceeded the maximum number of failed attempts to enter the PIN. The Sicrypt
SmartCard is blocked.
Enter the administrator PIN to re-activate the Sicrypt SmartCard. You must then enter a new
User PIN to restart the system.
32 - English A26361-D1740-Z120-1-6319, Edition: 3