Futrex Body Fat and fitness Analyzer -5500A/WL User Manual
Page 14
14
15)
Press the GREEN BUTTON on the light wand.
The display will flash a decimal point following the number “2”.
16)
Percent Body Fat is displayed and printed.
The FUTREX-5500A/WL will also print the following information:
•
Fat Weight (lbs of body weight that is fat).
•
Lean (fat-free) body weight.
•
Total Body Water (FUTREX-5500 A/WL Adult Users Only).
This is the calculation of the subject’s normal hydration state. The percent body water is
based on research that has shown lean tissue to be composed of approximately 73% water,
whereas fat contains 4 to 8% water. For example:
Men between 6 - 24% Fat; 69 - 57% Water
Women between 9 - 35% Fat; 67 - 50% Water
13)
Press the GREEN BUTTON on the light wand (NOTE: the ENTER button on the keypad may also be used).
The display will flash a decimal point following the number “1”. Then the number “2” will be displayed.
CAUTION: Do not move the Light Wand while the decimal point is illuminated. The actual estimation is being made at that time.
To Repeat the Measurement Sequence - Press ENTER and follow the steps outlined under 5-16.
OFF Message - An Off Message will appear and the FUTREX-5500A/WL Automatic Power Down feature will turn the unit off if
the user has not pressed any key for 6 minutes. To use the unit again, turn the Power Switch OFF and ON again.
14)
Remove the Light Wand and replace it on the same point on the biceps as shown in the illustration below: