Freecom Technologies 350 - Manual (Page 23)


Access PC via Network
EN

Chapter : Access PC via Network
.1 Connect LAN Cable
When connecting Computer to the Freecom MediaPlayer directly
Connect LAN cable to LAN port between Freecom MediaPlayer and PC. In this case, you
have to use a Cross-wired LAN cable.
If your computer's LAN card is already used for connection to Internet
line, you can install an additional LAN card to your PC and connect that
additional LAN card to the Freecom MediaPlayer.
When connecting with IP Router or Hub
Connect LAN cable to LAN port between IP Router or Hub. In this case, you have to use
Direct LAN Cable type generally.
When you want to play shared multimedia files on network, refer to
".Shared File Playback (Stream)".
If you want to use as Network Storage, refer to "4. Use as Network Stor-
age (NDAS)".