Freecom Technologies 350 - Manual (Page 69)

6
Connect to External AV Device
EN
6
6.. Network Setup
It is possible to obtain an IP address automatically from DHCP Server or IP Router, or to
set the specific IP address. Check your network environments.
DHCP On: You can use this option when it is possible to obtain IP address
automatically from DHCP Server or IP Router.
DHCP Off: You have to use this option if it is not possible to obtain IP
address automatically or you connect to your PC directly without DHCP
Server or IP Router, you have to use this option. Just enter the IP address
and Subnet mask.
"DHCP Support On" Setup Procedure
1. Turn on the Freecom Media Player and press "SETUP" on the Mode Selection screen.
2. Move to the 'Network' icon and press "OK". The setup box will be displayed under
the icon menu.
3. Select "DHCP Support-ON" and press "OK".
4. Press "SETUP" to save configurations.