Fisher-Price 75320 - Manual (Page 20)

Bubblin’ Fun
Disconnecting the Bubble Blower
• The bubble blower can be disconnected and still allow
your child to operate the vehicle. This is recommended for
indoor use.
• To unlock the lock fastener, use a slotted screwdriver
to rotate the lock fastener 1 / 4 turn to the unlocked posi-
tion. Lift the seat and remove it from the vehicle.
• Locate the bubble blower connector and unplug it from
the motor harness connector.
• Replace the seat to the vehicle.
• To lock the lock fastener, use a slotted screwdriver to
rotate the lock fastener 1 / 4 turn to the locked position.
• Store bubble solution in the exhaust pipe.
No Bubbles?
• Check the bubble solution level.
• Check to see if bubble blower fan is operating.
- Remove the reservoir cover and reservoir (see page 19,
step 4).
- Using a slotted screwdriver, rotate the lock fastener
1 / 4 turn to the unlocked position. Lift the seat and
remove it from the vehicle.
- Locate the bubble blower connector and make sure it is
connected securely.
- Lift the rear wheels of the vehicle off of the ground by
placing an object under the rear of the vehicle. Press the
power button on the steering wheel and place your hand
over the opening of the bubble blower. If you feel air
coming from the blower, the fan is working properly.
• Discard used bubble solution and fill with fresh
bubble solution.
• Dried bubble solution may cause the bubble wheel in
the reservoir to stick and not function properly. Remove
the reservoir from the bubble blower and clean (see
page 19, steps 4 and 5). Pour warm water into the
reservoir and fill completely. Let it soak until the bubble
wheel moves freely.
• We do not recommend the use of silicones or oily
lubricants on this product. As with any bubble producing
toy, when even a very small amount of silicone or oily
lubricants are put into, or used near the fluid chamber,
bubbles will not form.
20
7
8
• Replace the reservoir
back into the bubble
blower. Fit the reservoir
cover over the reservoir.
Align the tabs on the
reservoir cover and snap them back into the bubble blower.
• To prevent leaking, be sure to allow the bubble blower to
dry before bringing it indoors.
Reservoir Cover
Tab Tab
Reservoir
Bubble
Blower
6
Reservoir
Cover