Fisher-Price 75320 - Manual (Page 8)

• Fit a round bushing, barrel end first, onto the end of a
front axle. Push the round bushing into the wheel.
• Fit a cap nut onto the end of the front axle.
• Tap the cap nut with a hammer to secure it on the
front axle.
• Repeat this procedure to secure the other wheel to the
other front axle.
• While lifting the front of the vehicle frame, fit the steering
linkage onto the fork on the front of the vehicle frame.
Make sure the center axle is toward the rear of the vehicle.
• Position the handle bottom so that the smooth side
is upright.
• Insert the handle bottom peg into the hole in the side of
the vehicle frame, near the front end .
• Turn the handle over so that the grooved side is
upright .
3
2
4
Round Bushing
Cap Nut
Fork
Center Axle
Handle
Bottom
Vehicle Frame
Children can be harmed by small parts,
sharp edges and sharp points in the vehi-
cle’s unassembled state, or by electrical
items. Care should be taken in unpacking
and assembly of the vehicle. Children
should not handle parts, including the
battery, or help in assembly of the vehicle.
WARNING
• Slide a washer onto the steering linkage front axles.
• Slide a long bushing, long end first, onto each front axle.
• Slide a wheel, indented side first, onto each front axle.
Assembly
8
1
F
Long Bushing
Front Axle
Wheel
Indented Side Flat Side
Washer
Wheel Front Axle
Steering Linkage
Smooth
Side
Grooved
Side
Front View
Top View
Front of Vehicle Frame
A
A
B
B
Steering Linkage