Fisher-Price 75320 - Manual (Page 9)

• Position the handle top so that the smooth side is upright.
• Insert the handle top peg into the hole in the side of the
vehicle frame, near the front end.
• Fit the handle top and handle bottom together.
• Insert three screws through the handle top and into the
handle bottom. Tighten the screws with a Phillips screw-
driver. Do not over-tighten.
Assembly
5
9
Handle Bottom
Handle
Top
Top View
Peg
• Fit the nine tabs on the cowling into the nine slots in the
top of the vehicle. Make sure all nine tabs are in all
nine slots.
• Push down on the front, back and both sides of the
cowling to permanently secure the nine tabs into the nine
slots in the vehicle frame.
7
6
Cowling
Vehicle
Frame
Cowling
PUSH
PUSH
PUSH
PUSH
• Position the steering wheel top – right side up.
• Fit the power button harness down through the
rectangular opening in the steering wheel top.
• Insert and snap the power button into the steering
wheel top.
8
Steering Wheel Top
Power Button Harness
Rectangular Opening
Power Button