FilterStream D4200 User Manual
Page 15
15
Dust, dirt and debris suctioned
off by your Vacuum Chamber will
collect in the Stainless Steel Pre-
Filter Screen and HEPA Filter. To
empty/clean these parts, please
follow these steps:
1.Open Vacuum Chamber
Holding the Upper Vacuum
Chamber Housing with one
hand and the Lower Vacuum
Chamber Housing with the
other, depress the Housing
Release Latch on the front of
the unit just above the Air
Exhaust and separate the two
parts from each other.
(see figure 10)
2.Cleaning Stainless Steel Pre-
Filter Screen
To clean the Stainless Steel
Pre-Filter Screen, remove the
Stainless Steel Pre-Filter
Screen from the bottom of the
Upper Vacuum Chamber by
inserting your thumb and fore
fingers into the wide oval
notches and pulling the Steel
Pre-Filter Screen away from
the unit.(See Figure 11)
M A I N T E N A N C E
10
11
Fig.
Fig.
12
Fig.