FUJITSU 32 - Manual (Page 13)

6
3. Installation
3.1. Preparation
1. Check that the operating system is installed correctly.
2. Check that the SCSI adapter is installed to the computer.
3. Check whether the SCSI driver and ASPI manager are installed correctly and operating.
Note.
Version 4.01 or later of the ASPI Manager is required (For Windows
®
2000 or Windows
®
Me,
ASPI manager must be version 4.60 or later; For Windows
®
XP, ASPI manager must be
version 4.70 or later). Use Explorer or My computer to check the version number of the
WNASPI32.DLL file.
4. If the previous version was installed, first confirm that it has been uninstalled (deleted).
When uninstalling old versions, select [Control Panel] – [Add or Remove Programs] on the [Start]
menu and uninstall “Scanner utility for Microsoft Windows”.
5. Confirm that there is sufficient free space on the hard disk to install the software.
6. Turn off the personal computer.
7. Connect the scanner to your PC.
Refer to “Operator’s Guide” of the scanner for scanner connection.
In case of Windows
®
98, Windows
®
Me, Windows
®
2000, or Windows
®
XP, FUJITSU TWAIN32
Version 9.16 is installed. Refer to “FUJITSU TWAIN32 Version 9.16 User’s Guide”