FUJITSU 32 - Manual (Page 56)

49
♦ Digital Endorser
Character string, such as the alphabet and number, is added on the data of the scanned image.
By using this filter, you can attach a name, a date, a time or a serial number on the scanned
images and manage them.
Printing
Specify the beginning position of the character string to output on the scanned image
data.
X Offset: Specify the position of the width direction from the left end of document.
Y Offset: Specify the position of the length direction from the top of document.
Unit: Select either “mm” or “inch” as the unit of offset value.
Counter
Specify the rule of the counter value used in the String.
Initial Value: Specify the initial count when the scanning starts.
Step: Specify the counter increment / decrement.
Counter: Select whether to increase or decrease the specified step value.
For example) In case of “Initial Value”= 0, “Step”= 2, “Counter”= Increment
0, 2, 4, 6, 8.....
String
Specify the output string.
The following characters can be outputted by the Imprinter.
Alphabet Letters : A-Z, a-z
Numeric Characters : 0, 1-9