FUJITSU 32 - Manual (Page 14)

7
3.2. Starting Installation
The screen and operations will differ slightly depending on the OS that is being used.
1. Turn on the scanner.
2. Turn on your PC and Log on to Windows ® .
When using Windows NT
®
4.0, log on as an administrator.
The scanner may be detected automatically, and the "Update Device Driver Wizard"
window is displayed.
In this case, Click [Cancel] button to close this Wizard window.
3. Insert the Scanner Driver CD-ROM into the CD-ROM drive.
<SETUP DISK START UP SCREEN> is displayed.
This Dialog is not displayed automatically when "Auto play" setting of your PC is off.
In this case, please run “Install.exe” in this CD-ROM directly using “Explore” or “My
computer”.