Furuno SC-120 - Manual (Page 11)

SP - 1 E7249S01H
SPECIFICATIONS OF SATELLITE COMPASS
SC-120
1 GENERAL
1.1 Receiver Type 12 discrete channels GPS
1.2 RX Frequency 1575.42 MHz (L1)
1.3 Class of Service Standard Positioning service (SPS) using the C/A code on the L1
frequency
1.4 Processing All-in-view, 8-state Kalman filter
1.5 Position Accuracy 10 m (GPS), or 5 m (DGPS), 95% of the time
1.6 Heading Accuracy ±0.6° (95% static accuracy)
1.7 Follow-up 25°/s rate-of-turn
1.8 Settling Time 4 minutes
2 DISPLAY
2.1 Display Type 4.5 inch monochrome LCD, 120 x 64 dots
2.2 Effective Area 95 mm (W) x 60 mm (H)
2.3 Contrast 64 steps
2.4 Display Mode Heading, Nav data, Steering, Compass rose, Rate of turn and Speed
modes
3 INTERFACE
3.1 Heading Output 3 ports: AD-10 or IEC 61162-1 Ed.2
1 port: NMEA 0183 (Ver1.5/2.0)
IEC 61162 Sentences: HDT, HDM, VTG, ZDA, GGA, ROT
3.2 COG, SOG, L/L Output 1 port: IEC 61162-1 Ed.2
1 port: RS-232C level
IEC 61162 Sentences: VTG, GGA, ZDA, GLL, ROT,
PFEC, Gpatt (FURUNO P-sentences)
ATT (Proprietary): incl. pitch, roll and yaw data
$PFEC,GPatt,xxx.x,+xx.x,+xx.x<CR><LF> (Ver. 1.5)
$PFEC,GPatt,xxx.x,+xx.x,+xx.x*hh<CR><LF> (Ver. 2.0)
3.3 Log Output 1 port: 200/400 pulse/nm (closure signal)
3.4 Alarm Output 1 port: Alarm signal (closure signal)
3.5 Heading Input 1 port: Backup Heading (AD-10/IEC 61162 format) from external
heading device
Sentences: HDT, HDG, HDM
(VBW, VHW, VLW for tide direction and speed)
3.6 Beacon Data Input 1 port: RTCM SC-104 format for RS-232C