Furuno SC-120 - Manual (Page 20)

2. INSTALLATION
2-6
4. As shown below, make a loop in the antenna cable and fasten the antenna
cable to the antenna post with two cable ties.
Fix antenna cable.
Coat with Three
Bond 1211
(supplied).
Coat bolt threads with
Three Bond. Fasten bolt
with nuts and then coat
nuts with Three Bond also.
5. Coat bolt threads with
Three Bond 1211.
Fasten bolts with nuts.
Coat nuts at the
bottom of each
antenna element with
Three Bond 1211.
6. Paint post and support
plate with
anti-corrosive paint.
7. Attach “bird-repellent
fixtures” (supplied) to
each antenna element
and center cover as shown right. Antenna element
Bird-repellent fixture