Fujitsu Siemens Computers LifeBook B6230 - Manual (Page 3)

3
1. When you turn on or restart the computer there is a
beep and/or the following message appears on the
screen:
Error message - please run SETUP
program Press <F1> key to continue,
<F2> to run SETUP
2. If an error message is displayed on the screen, and
you want to continue with the boot process and start
the operating system anyway, press the [ F1 ] key.
3. If an error message is displayed on the screen, and you
want to enter the setup utility, press the [ F2 ] key.
4. When the setup utility starts with a fault present, the
system displays the following message:
Warning!
Error message
[Continue]
5. Press any key to enter the setup utility. The system
will then display the Main Menu with current
parameters values.
If your settings require it, you may be
asked for a password before the operating
system will be loaded.
M a i n M e n u