Fujitsu Siemens Computers LifeBook B6230 - Manual (Page 6)

6
L i f e B o o k B 6 2 0 0 N o t e b o o k B I O S
Drive0 Submenu of the Main Menu
The Drive0 submenu identifies which ATA devices are
installed.
Note: Actual hard drive label shown may vary. Depending
on the drive type, information such as cylinders, heads and
sectors may also be displayed.
Figure 2. Drive0 Submenu
Exiting from Main Menu
When you have finished setting the parameters on this menu, you can either exit from the setup utility, or move to
another menu. If you wish to exit from the setup utility, press the [
Esc ] key or use the cursor keys to go to the Exit
menu. If you wish to move to another menu, use the cursor keys.
Table 2: Fields, Options and Defaults for the Drive0 Submenu of the Main Menu
Menu Field Options Default Description
Type: ■ Auto
■ None
[Auto] Selects the Serial ATA/IDE device type. Select Auto to have the type auto-
matically identified by the BIOS at POST. If None is selected, all of the fol-
lowing Set-up items do not appear.
LBA Format Logical Block Addressing (LBA)
Total Sectors: --- --- The total number of sectors on your hard disk
Maximum
Capacity: --- --- The maximum capacity of your hard disk
PhoenixBIOS Setup Utility
F1 Help
ESC Exit
Select Item
Select Menu
-/Space Change Values
Enter Select Sub-Menu
F9 Setup Defaults
F10 Save and Exit
▲
Main Advanced Security Power Boot Info Exit
Item Specific Help
Select Serial ATA/IDE
drive installed here.
[Auto]
The BIOS auto-types the
drive on boot time.
[None]
The drive is disabled.
Drive0 [Hitachi HTS541680J9SA00]
Type: [Auto]
LBA Format
Total Sectors: 156301488
Maximum Capacity: 80026MB SATA1