2 hardware environment, 3 static disk resources, 1 disk space requirements – FUJITSU Ethernet 2.4 User Manual

Page 4: 5) unified installer, 2) hardware requirements

Advertising

board installing the Quad GigabitEthernet card (PW008QG1), this
patch is needed.

110900-12

On Solaris 8 OS, when PCI Hot Plug function is executed to the Quad
GigabitEthernet card (PW008QG1), this patch is needed.

112838-11

On Solaris 9 OS, when PCI Hot Plug function is executed to the Quad
GigabitEthernet card (PW008QG1), this patch is needed.

118822-11

On Solaris 10 OS, when PCI Hot Plug function is executed to the
Quad GigabitEthernet card (PW008QG1), this patch is needed.

5) Unified Installer

* Related Files

Below files are included. The file path is from CD-ROM root.

- ./.FJSVclis/Disk1/cdsetup

: The script for information about Product CD.

- ./.FJSVclis/Product1/prodsetup

: The script to install Product CD.

- ./.FJSVclis/Product1/admin

: The file for package adding.

- ./.FJSVclis/Config1/I08FJSVgid.sh

: The script to set the operating mode.

- ./.FJSVclis/Config1/FJSVgid_config_readme.txt : Readme file of the script to set the operating mode.

- ./.FJSVclis/Config1/config/fjgi.sh

: The script for auto setting used by I08FJSVgid.sh.

* Precondition

The files cdsetup and prodsetup are created in order to be called from the Unified installer.

* Required Product

- Enhanced Support Facility

When you install this CD-ROM by Unified Installer, please carry out to the host in whom required product has

simultaneously or already been installed.

3.2 Hardware Environment

The following hardware environments are required to use this software.

1) Main memory

Main memory of 64M bytes or more is required.

2) Hardware requirements

The following table shows the I/O devices that can use this software.

No. Device

Name

Model

Remarks

1 GigabitEthernet

Card PW008GE4/PW0G8GE1/PW008GE5/

PW0G8GE2/PW008QG1

GigabitEthernet Port

PRIMEPOWER250/450 secondary LAN port

Make sure that the above-mentioned GigabitEthernet card is set up before installing this software and complete card

recognition by "boot -r" command.

3.3 Static Disk Resources

The disk space requirements for this software are shown below.

3.3.1 Disk space requirements

The following table lists the disk space requirements for installing this software. If necessary, expand the size of the

appropriate file systems.

No.