FUJITSU FBR211 - Manual

n FEATURES
l
2 A maximum carrying current
Capable of 2 A maximum continuous carrying current in the
contact
l
Superior reliability gold-overlay contacts
P type: Gold-overlay silver-palladium contacts
l
International terminal pitch of one inch grid terminal layout
l
High sensitivity, low power dissipation types also available
Standard types: 0.45 W (A or B type)
High sensitivity types: 0.2 W (C or E type)
l
Conforms to FCC 68.302 (high dielectric strength type)
l
UL recognized (File number E63615)
l
CSA recognized (File number LR64026)
l
RoHS compliant since date code: 0433A
Please see page 5 for more information
(a) Series Name FBR211
(b) Enclosure S: Flux free type
N: Plastic sealed type
A: Standard A type
}
(nominal power 450 mW type)
(c) Coil Power and Schematics B: Standard B type
C: High sensitivity C type
}
(nominal power 200 mW type)
E: High sensitivity E type
(d) Nominal Voltage (Example) D003: 3 VDC
D012: 12 VDC (refer to the COIL DATA CHART)
(e) UL Marking on Cover Nil : No UL marking
U : UL marking
(f) Contact Material P : Gold-overlay silver-palladium
M : Gold-overlay silver
(g) Special Type Nil : Standard
2 : High dielectric strength type
(h) CSA Marking Nil : Standard
-CSA : UL + CSA marking (valid when (e) is U)
Note: The designation name is stamped on the top of the relay case as follows:
(Example) Designation ordered: FBR211SAD005-P
Stamp: 211SAD005-P
n ORDERING INFORMATION
FBR211 S A D012 U – P 2 (–CSA)
[Example] (a) (b) (c) (d) (e) (f) (g) (h)
FBR211 SERIES
MINIATURE RELAY
1 POLE—1 to 2 A
(FOR SIGNAL SWITCHING)
1
RoHS compliant
DISC
ONTINUED
(1998)