FujiFilm DVD-A1XV User Manual
Page 16
16
CH SEL
ENTER
(5) Connecting a basic 5.1-channel surround system
Analog 5.1-channel audio signals can be output from the DVD-A1XV.
The multi-channel audio signals recorded in packed PCM and the multi-channel Super audio CDs can be played when an AV amplifier
equipped with analog 5.1-channel audio inputs is connected.
DVD-A1XV
AV amplifier with 5.1-channel input terminals
To power outlet
SURROUND
SUBWOOFER
CENTER
FRONT
NOTES:
• For multi-channel connections, set “AUDIO CHANNEL” under “AUDIO SETUP” at “SETUP” to “MULTI CHANNEL” and make
the “SPEAKER CONFIGURATION”, “CHANNEL LEVEL” and “DELAY TIME” settings. (See pages 46 ~ 51.)
• With the DVD-A1XV, we recommend turning the digital output off by using the “PURE DIRECT MODE” and only outputting
analog signals in order to keep interference from the digital output circuitry to a minimum and allow you to enjoy high-quality
multi-channel sound thanks to the high-bit, high sampling frequency. (See pages 57, 58.)