Fluke LOCAL - Manual (Page 11)

Instructions
Operation
2
2-5
2.7 Operation
The red beacons and red leds are ON .
The flasher alarm is blinking .
Connect the free end of the I/O (1060ds-24) cable to the model 1060AM-NM-LR I/O
connector.
Connect the 1060AM-NM-110 (12 volt 500 mA) power cube connector to the 1060AM-
NM-LR power input .
The red beacons turn off and the green ones are on .The green LED’s are also on.
The flasher alarm is now off .