Furuno FRS-1000C - Manual (Page 4)

Full-featured, All-in-One Navigation Package
Plotter display in north-up mode Plotter/Sounder display
Plotter display with control menu
The GPS receiver allows high accuracy position fixes.
There is the choice of four presentation modes:
North-up, Head-up, Course-up and True Motion.
Chart data loaded from a FURUNO or NAVIONICS
chart card (optional) presents coastlines with place
names, depth contours, buoys, lighthouses and other
navigational marks.
The plotter control menu is called up by pressing the
[PLTR] Menu/Esc key. This menu permits you to zoom in
and out the plotter display, select display modes, enter
waypoints, and so forth by combined use of the softkeys
and Omni-pad.
Marks can be entered in different shapes, line types and
colors to record your own secret points. When you have specified a destination or the next
waypoint, you may set a cross-track-error (XTE) alarm
zone. This will make it easier to keep your vessel on the
correct course.
The plotter display can be either overlaid with the radar
image or combined with the echo sounder picture.
Plotter control menu
Nav data display
Planned
route
Lighthouse
Cursor position
Range/bearing
to cursor
Waypoint data
Cursor
Own ship
Course
bar
Depth
contour
A revolutionary new all-in-one navigation package
is now available from FURUNO. The world's first
Radar/Plotter/Sounder Models FRS-1000A/1000B/
1000C provide an ultimate solution to needs of a
wide range of boaters.
This intelligent system permits you to present a
radar display, GPS chart plotter and dual-frequency
echo sounder pictures independently or in
combination on a highly visible 10.4-inch TFT color
LCD screen.
The individual system elements are ingeniously
integrated without sacrificing the ease of operation.
The straightforward menu structure combined with
the OMNI-pad and softkeys ensures remarkably
simple operation of the radar, GPS plotter and
echo sounder.
One or two remote displays can be optionally
added. The main display unit and the individual
remote displays can be operated independently of
each other. Thus, the remote display on the upper
deck may be set to echo sounder mode while the
main display in the navigation bridge is used as the
radar/GPS plotter, for example.
Optional supplies include the Auto Plotter ARP-10,
DGPS beacon receiver kit with GPS/DGPS
antenna, speed/temperature sensors, as well as
FURUNO or NAVIONICS chart cards.
GPS Receiver / Plotter
GPS Receiver / Plotter