Furuno FRS-1000C - Manual (Page 5)

Radar display with control menu
Four presentation modes are available:
Head-up, Course-up, North-up and True Motion
modes. In the True Motion mode, own ship and
targets move according to their actual speed and
heading while fixed targets including land echoes
remain stationary. The user can easily understand
the overall situation.
Standard features include two VRMs and two
EBLs, off-centering to cursor position, echo trails,
echo stretch and guard zone alarm.
Radar control menu
Nav data display Heading mark
Cursor position
Range/bearing
to cursor(+)
Waypoint data
Cursor
VRM 1
EBL 1
EBL 2
The radar control menu is displayed by pressing the
[RDR] Menu/Esc key. This menu permits you to switch
the radar between transmit and standby conditions,
select range scales, adjust gain/clutter suppression,
and control EBLs/VRMs by using the softkeys and
Omni-pad.
The guard zone alarm permits you to set a fan- or
ring-shaped guard zone at a desired position with a
choice of inward or outward target alerting.
A 48 rpm antenna is optionally available for the
FRS-1000B or FRS-1000C to ensure uninterrupted
picture updating for high-speed vessels.
Auto Plotter ARP-10 (option)
Auto Plotter ARP-10 (option)
The Auto Plotter ARP-10 option is added to the processor unit.
It permits automatic or manual acquisition of up to 10 targets,
tracks them at specified plot intervals, presents alphanumeric
target data, and triggers a collision alarm for targets violating
preset CPA/TCPA limits.
Target acquisition : Automatic or manual acquisition of up to 10
targets in 0.2-16 nm
Tracking range : 0.1-16 nm
Vector mode : True or relative vector
Vector length : 30 sec, 1, 2, 3, 4, 5, 6 or 12 min.
Target plot interval : 15 or 30 sec, 1, 2, 3 or 6 min.
Audio-visual alarm : Produced against lost targets and targets on
collision course
Target data display : Range, bearing, course, speed and
CPA/TCPA of a chosen target
ARP-10 can not be used with 48 rpm antenna speed option
Heading data in AD-10 format required
Tracked
target
Target
data
Radar
Radar
Radar/Plotter/Sounder display
Radar display in north-up mode
Radar/Sounder display
VRM 2
VRM 2
VRM 1
EBL 2
EBL 1