Furuno FRS-1000C - Manual (Page 7)

SYSTEM CONFIGURATION
For FRS-1000B For FRS-1000C
RSB-0071-057
RADAR ANTENNA
GPS/DGPS ANTENNA
For FRS-1000A
10.5 to 40.0 VDC
GPA-016
TRANSDUCER
Optional
115/230 VAC
1
∅
, 50/60 Hz
PROCESSOR UNIT
RSM-001
DGPS
BEACON
RECEIVER
BOARD * 3
AUTO
PLOTTER
ARP-10 * 2
GYRO
CONVERTER
AD-100
HEADING
SENSOR
PG-1000
RECTIFIER
RU-1746B-2
SPEED/TEMP.
SENSOR
REMOTE
DISPLAY UNIT
RSD-002 * 1
REMOTE
DISPLAY UNIT
RSD-002 * 1
MATCHING
BOX
MB-1000
XN8-RSB-0082-064 (24 rpm)
XN8-RSB-0083-064 (48 rpm) XN12A-RSB0070-059 (24 rpm)
XN12A-RSB0073-059 (48 rpm)
50/200 kHz
1 kW
DISPLAY UNIT
RSD-001
10.5 to 40.0 VDC
50/200 kHz
600 W
(Specify when ordering)
10.5 to 40.0 VDC
15 m
Standard
*2: 48 rpm antenna cannot
be used and heading data in AD-10 or NMEA0183
format required
*1: Up to two remote display units
may be connected.
*3: DGPS requires built-in beacon
receiver board
Optional
Whip antenna
Cable length
30 m max from
Processor unit
to the last
remote display.
GPA-018S
*
3 (For DGPS)
GPA-019S
*
3 (For DGPS)