Furuno FS-1562-15 - Manual (Page 38)

-5.2-
TROUBLE PROBABLE CAUSE REMEDY
Key input is not accepted FS-1562 is under control of
external equipment
"REM" appears when controlled
by external equipment. Suspend
operation of external operation.
Antenna coupler can’t tune
antenna Antenna may be disconnected or
shorted to ground
Antenna is out of tunable length.
Poor grounding of the coupler.
Breaker in coupler has tripped.
Connection cable loosened or
disconnected.
Check antenna connection.
Recommended length is 7 to 30
meters.
Check coupler ground.
Check mains voltage and
polarity. If they are normal,
reset breaker.
Check cable.
Can not tune in a broadcast
station Missing last numeral at the digit
of 1 when trying to tune in the
station.
Wrong setting of MODE
The station is off air
To tune in 9640 kHz for
instance, press [RX], [9], [6],
[4], [0], [0], [ENT]. Do not
miss the last [0]; otherwise you
will set 964.0 kHz.
Select H3E.
Select another frequency.