Security menu - setting the security features, Security menu – setting the security features – Fujitsu Siemens Computers V1020 User Manual

Page 19

Advertising
background image

19

SECURITY MENU – SETTING THE SECURITY FEATURES

The Security menu allows you to set up the data security
features of your notebook to fit your operating needs
and to view the current data security configuration. (See
Navigating through the Setup Utility on page 2 for more
information.)

The following tables show the names of the menu fields
for the Security Menu and its submenus, all the options
for each field, the default settings and a description of
the field's function and any special information needed
to help understand the field's use. The default condition
is no passwords required and no write protection.

Figure 13. Security Menu

Remember your passwords! If you set and
forget your User and Master hard disk
passwords, Fujitsu Computer Systems will
not be able to reset it. You may lose data
and have to replace your system board or
hard disk drive.

Entering a password incorrectly 3 times in
a row causes the keyboard and mouse to
be locked out and the warning [System
Disabled]

to be displayed. If this hap-

pens, restart the computer by turning off
and on the power with the power switch
and use the correct password on reboot.

If you make an error when re-entering
the password a Warning will display on
the screen. To try again press [Enter],
then retype the password. Press [Esc] to
abort the password setting process.

If Security Panel on Resume is Enabled
and the Password on Boot is Disabled
you will not have to type your password
upon resuming the system from the Sus-
pend or Save-to-Disk modes. Power
Management Security will work only if
Password boot is enabled.

F1

Help

ESC

Exit

Select Item

Select Menu

-/Space

Enter

F9

Setup

Defaults

F10

Save and Exit

Change Values

Select Sub-Menu

Item Specific Help

Press <Enter> key to

set Supervisor Password

to enable any password

features.

Then password entry is

required to enter BIOS

Setup.

Supervisor Password Is:

Clear

User Password Is:

Clear

Set Supervisor Password

[

Enter

]

Set User Password

[Enter]

Minimum User Password Length:

[0]

Password on Boot:

[Disabled]

On Automatic Wake up:

[Disabled]

Boot from Removable Media:

[All]

Flash Write:

[Enabled]

Hard Disk Security

Owner Information

▲ ▲

Phoenix TrustedCore(tm) Setup Utility

Info System Advanced

Security

Boot Exit

S e c u r i t y M e n u

Advertising