Fujitsu Siemens Computers V1020 - Manual (Page 6)

6
L i f e B o o k V S e r i e s B I O S
Drive0 Selects the Drive0
Serial ATA drive
submenu The product
number of the hard
drive. Display the type of device on this ATA/IDE interface. Pressing the
Enter key selects the Serial ATA Drive0 submenu allowing additional
device configuration options for this interface.
Drive1: Selects the Drive1
Serial ATA drive
submenu The product
number of the
optical drive. Display the type of device on this ATA/IDE interface, if there is one.
Pressing the Enter key selects the Serial ATA Drive1 submenu allow-
ing additional device configuration options for this interface.
Language: ■ English (US)
■ Japanese (JP)
[English (US)] The default setting differs between the US/European and the
Japanese model. Selects the display language for the BIOS.
Table 2: Fields, Options and Defaults for the System Menu
Note that the parameters listed in the following table may vary depending upon your system’s configuration.
Menu Field Options Default Description