First steps, Inserting the batteries – FujiFilm FinePix A150 User Manual

Page 10

Advertising
background image

Fi

rs

t S
te

p

s

4

Inserting the Batteries

The camera takes two AA alkaline (LR6) batteries (supplied) , two lithium batteries (sold separately) or two
AA rechargeable Ni-MH batteries (sold separately). Insert the batteries in the camera as described below.

1

Open the battery-chamber cover.

1 Note
Be sure the camera is off
before opening the battery-
chamber cover.

3 Cautions
• Do not open the battery-chamber cover when

the camera is on. Failure to observe this pre-
caution could result in damage to image fi les or
memory cards.

• Do not use excessive force when handling the

battery-chamber cover.

2

Insert the batteries.

Insert the batteries in the
orientation shown by the
“+“ and “–“ marks inside
the battery chamber.

3

Close the battery-chamber cover.

3 Cautions
• Insert the batteries in the correct orientation.
Never use batteries with peel-

ing or damaged casing or mix
old and new batteries, batter-
ies with diff erent charge levels,
or batteries of diff erent types

.

Failure to observe these precautions could re-
sult in the batteries leaking or overheating.

Never use manganese or Ni-Cd. Replace AA alkaline

batteries with batteries of the same make and
grade as those supplied with the camera.

If the battery-chamber cover can not be latched easily,

confi rm the battery orientation fi rst. Do not use exces-
sive force to latch it.

Battery casing

Battery casing

Battery casing

Battery casing

Advertising