FujiFilm FinePix A150 - Manual (Page 44)

38
Printing Pictures via USB
If the printer supports PictBridge, the camera can be connected directly to the printer and
pictures can be printed without fi rst being copied to a computer. Note that depending on
the printer, not all the functions described below may be supported.
Connecting the Camera Connecting the Camera
1 Connect the supplied USB cable as shown and
turn the printer on.
2 Press the D button for about a second to turn
the camera on. I USB will be displayed in
the monitor, followed by the PictBridge display
shown below at right.
USB PICTBRIDGE
TOTAL: 00000
SHEETS 00
OK SET
FRAME
Printing Selected Pictures Printing Selected Pictures
1 Press the selector left or right to dis-
play a picture you wish to print.
2 Press the selector up or down to
choose the number of copies (up to
99).
3 Repeat steps 1–2 to select additional
pictures. Press MENU/OK to display a
confi rmation dialog when settings
are complete.
CANCEL YES
PRINT THESE FRAMES
TOTAL: 9 SHEETS
4 Press MENU/OK to start printing.