Fisher-Price DODGE 73520 - Manual (Page 15)

15
Assembly
Traction
Band
Center Rib
• Slide a front wheel, inside first, onto a front axle.
• Fit a traction band onto the center rib on one of the front
wheels, as shown.
Hint: If it is difficult to position the traction band on the
wheel, try soaking it in hot water for about two minutes
to soften it.
Traction Band
• Using a slotted screwdriver, pull the other side of the
traction band around the front wheel.
• Make sure the traction band covers the center rib all
around the front wheel.
• Repeat assembly steps 20 and 21 to assemble the other
traction band to the other front wheel.
Front
Wheel
• Identify the inside and the outside of the front wheel.
- Inside of front wheel has circular indents.
- Outside of front wheel has a rectangular indent.
Rectangular Indent Circular Indents
Front Wheel
Front Axle
Inside of Front Wheel Outside of Front Wheel
Inside of
Front Wheel
Circular
Indents
20
21
22
23
Bottom View
73520 Dodge Ram 6/27/01 2:56 PM Page 15