Fisher-Price DODGE 73520 - Manual (Page 9)

9
• Plug the charger into a standard 120 volt wall outlet.
Note: If power flow to the wall outlet is controlled by a
switch, make sure the switch is ON.
• Before first time use, charge the battery for at least 18
hours. Never charge the battery longer than 30 hours.
Note: The battery must be upright while charging.
• Recharge the battery after each use of your vehicle for
at least 14 hours. Do not charge the battery longer than
30 hours.
• Once the battery is charged, disconnect the charger
connector from the battery connector. Unplug the
charger from the wall outlet. The battery is now ready to
be installed in your vehicle. Please see “Battery
Installation” on page 24 for detailed instructions on
installing your battery. If your battery is already installed
in your vehicle, simply re-connect the battery connector
and motor harness connector and lower the hood. Using
a slotted screwdriver, turn each lock fastener
1 /
4
turn to
the locked position.
IMPORT ANT
A 25 AMP FUSE MUST
BE INST ALLED IN TOP
OF BA TTER Y BEFORE
TOY WILL RECHARGE
OR OPERA TE
®
• Insert a Power Wheels ® 25 amp fuse into the battery.
Note: The top of the fuse will not be flush with the top of
the battery when properly installed.
• Plug the battery connector into the charger connector.
Battery
Connector Charger
Connector
25 Amp Fuse
Charger
Battery Charging
IMP OR T A NT A 2 5 A MP FU SE MU ST BE INS T A LL ED IN T OP OF BA TT ER Y B EF OR E TO Y W ILL R EC HA RG E OR OP ER A T E
®
• While pushing the battery clamp, lift and remove the
battery from the battery compartment.
• Remove and throw away the protective cardboard material.
IMPORTANT! The battery must be removed from your
vehicle for the initial charge in order to complete assembly.
After assembly is complete, you do not need to remove
the battery from your vehicle to recharge it.
Battery
Battery Clamp
1
2
3
4
Front View
73520 Dodge Ram 6/27/01 2:56 PM Page 9