Fluke 1744 User Manual

Page 25

Advertising
background image

1744/1743

Users Manual

16

•

Use only the current probes specified in this manual. If
you use flexible current probes, wear suitable
protective gloves or work on de-energized conductors.

•

Do not expose the Logger to moisture or humidity.

•

To prevent electrical shock, always connect power
supply and voltage test leads to the Logger before
connecting to the load.

•

All accessories must be approved for 600 V CAT III or
higher.

•

Use the Logger only with its original standard
equipment or with approved optional accessories, as
listed in Table 2 and Table 3 in this manual.

•

Connect clip-on current transformers and/or Flexi Set
to insulated live conductors only.

•

If measuring sensors are to be connected to non-
insulated live conductors, additional personal
protective measures must be taken as required by local
government agencies.

W

Caution

To avoid damage, use the 1744/1743 Power Quality Logger,
only with the following nominal voltages:

•

Single-/3-phase, 4-wire (Wye) systems (P-N): 69 V
to 480 V

•

3-phase 3-wire (Delta) systems (P-P): 120 V to 830 V

WX

Warning

To avoid electrical shock, or damaging the Logger’s
internal protective circuitry or weatherproof seal, do not
open the Logger.

Advertising
This manual is related to the following products: