Logging function p, Logging values, Application – Fluke 1744 User Manual
Page 63
1744/1743
Users Manual
54
Logging Function P
Logging Values
Voltage L1 or A, L2 or B, L3 or C: phase-phase or phase-neutral:
•
Voltage (mean, min, and max values)
•
THDV (mean, and max values)
•
Flicker Pst, Plt
•
Voltage events (dips, swells, interruptions)
Current L1 or A, L2 or B, L3 or C, and N:
•
Current (mean, max values), THDI
Power:
•
Active power P (mean, min, and max values)
•
Absolute values active power |P| (mean, min, and max values)
•
Apparent power S (mean, min, and max values)
•
Power Factor PF, tangent
•
Energy per averaging interval
Total Power:
•
Total power P, |P|, S
•
3-wattmeter and 2-wattmeter method (Aron circuitry)
Application
Power logging:
•
Long-term analysis of active, reactive, apparent power
•
Long-term analysis of power factor, symmetry
Disturbance analysis:
•
Examination of voltage dips and swells, flicker measurement
Network optimization:
•
Load measurements, acceptance of new loads
•
Efficiency of compensation systems
Test Equipment Depot - 800.517.8431 - 99 Washington Street Melrose, MA 02176
FAX 781.665.0780 - TestEquipmentDepot.com