FUNAI ZV450TT8 - Manual (Page 47)

47 EN
Disc
Management
Recording
Playback
Introduction
Connections
Basic Setup
Editing
Function
Setup
VCR Functions
Others
Español
4 Use [K / L / { / B] or [the Number
buttons] to enter the start and end
time, then press [B].
Date
JAN/02
CH
DTV125- 1
REC To Speed
DVD 2H
2H 2 : 00
Start End
- - : - - 12 : 00AM
5 Use [K / L / { / B] to select analog
(“- - -”) / digital (“DTV”) mode or
external input (L1 / L2), then press [B].
Date
JAN/02
CH REC To Speed
DVD 2H
2H 1 : 00
Start End
12 : 00AM 1 : 00AM
L1
To record from external input (e.g., cable/
satellite box), select L1 or L2.
Use [K / L] to select the channel number to
record.
For digital mode, select both major and minor
channels. Refer to “How to select a channel
number for the timer recording” on this page
for more details.
e.g.) analog mode
Date
JAN/02
CH REC To Speed
DVD 2H
2H 1 : 00
Start End
12 : 00AM 1 : 00AM
10
e.g.) digital mode
Date
JAN/02
CH REC To Speed
DVD 2H
2H 1 : 00
Start End
12 : 00AM 1 : 00AM
DTV125- 1
6 Use [K / L] to select a recording media
(“DVD” or “VCR”), then press [B].
Date
JAN/02
CH REC To Speed
2H
2H 1 : 00
Start End
12 : 00AM 1 : 00AM
DTV125- 1 DVD
7 Use [K / L] to select a recording
speed.
Date
JAN/02
CH REC To Speed
2H 1 : 00
Start End
12 : 00AM 1 : 00AM
DTV125- 1 DVD 2H
Refer to “Recording Speed” on page 43 for DVD
or “Recording” on page 93 for VCR.
• You can check the remaining recordable space
of the disc when you select the recording
speed.
Date
JAN/02
CH REC To Speed
2H 1 : 00
Start End
12 : 00AM 1 : 00AM
DTV125- 1 DVD 2H
8 Press [ENTER] when all items are
entered.
Your program setting will be stored.
• To set another program, repeat steps 2 to 7.
• To exit, press [TIMER PROG.] or [SETUP].
• When 2 or more programs are overlapped,
“Timer program overlapped” appears, and the
overlapped program will be displayed in blue.
To correct the timer program refer to
“Checking, canceling, or correcting the timer
programming information” on page 48.
9
Press [T-SET] to set a timer
programming.
will appear on the front panel display, while this
unit waits to make the recording.
BS CS DR CD
HDD
DVD
"VCR” will appear if VCR timer recording have
been set.
TIMER RECORDING
How to select a channel number for the timer recording
Analog TV For channel number 2-6, press [B] or [ – ] to decide the channels. For other channels (7-69), the
channel will be decided as soon as you enter the channel number.
Analog CATV For channel number 1-12, press [B] or [ – ] to decide the channels. For other channels (13-125),
the channel will be decided as soon as you enter the channel number.
Digital TV For channel number 1-9, press [B] or [ – ] to decide the channels. For other channels (10-99), the
channel will be decided as soon as you enter the channel number.
Digital CATV For channel number 1-13, press [B] or [ – ] to decide the channels. For other channels (14-135),
the channel will be decided as soon as you enter the channel number.
minor channels For channel number 1-9, press [B] or [ – ] to decide the channels. For other channels (10-99), the
channel will be decided as soon as you enter the channel number.
<Hint>
• You can decide the 1-digit channel number by pressing 0 first , then enter desired 1-digit channel number.
e.g.) “5”: [0]+[5]
• For selecting the channels with [K / L], you need to press [B] or [ – ] to decide the channel number.
• For selecting the minor channels with [K / L], please make sure the minor channel your are selecting is existed.
[K / L] does not skip the non-existed minor channels.